Nowadays, there are various options available to us if we get bored of using a particular ROM or sometimes it happens that our smartphone requires a clean fastboot flash to fix it. So, today let’s discuss fast booting your device using the Mi Flash Tool.
Thing’s Required :
1 PC/Laptop.
2 USB Cable.
3 Mi Flash Tool.
4 Latest device specific Fastboot ROM.
5 7 Zip software for PC.
6 Fully charged Mi Smartphone (at least 50% charge should be there else it may cause trouble).
Once all the above are arranged, we can proceed further…
1 Install 7 Zip.
2 Using 7 Zip extract the Fastboot ROM (TGZ File).
3 You will find another zip file (TAR File) in the extracted folder. Extract that file too using 7 Zip
4 Install Mi Flash Tool.
5 Open Mi Flash Tool using icon created after installation.
6 Switch off your phone.
7 Press Vol – & Power button simultaneously to start the device in Fastboot Mode.
8 Now connect the phone to your PC/Laptop using USB Cable.
9 Press the Refresh button & you will have the following screen of Mi Flash Tool.
Once the device is connected & detected, enter the correct path of the final extracted folder using the Browse button.
Select Flash All for best results as it will clean install the ROM. Now, press Flash button & wait for the procedure to complete. Once successfully flashed device will reboot & you can safely disconnect it from your PC/Laptop.
The device will be showing Mi Logo screen, it will take some time to install entire MIUI on your device so kindly wait patiently & let the process end. Once the process ends it will show the MIUI 9 logo for you to do the device set up – just like the new device you get out of the box. Complete the setup & your device is ready to be used.
IMPORTANT NOTE :
I did it successfully on my Xiaomi Redmi Note 4.
Carry out each instruction very carefully & exactly as directed.
I’m not at all responsible for any damage whatsoever to your device.
Fastboot your device at YOUR OWN RISK.
Take the backup of your data as all will be removed during the process.
Thing’s Required :
1 PC/Laptop.
2 USB Cable.
3 Mi Flash Tool.
4 Latest device specific Fastboot ROM.
5 7 Zip software for PC.
6 Fully charged Mi Smartphone (at least 50% charge should be there else it may cause trouble).
Once all the above are arranged, we can proceed further…
1 Install 7 Zip.
2 Using 7 Zip extract the Fastboot ROM (TGZ File).
3 You will find another zip file (TAR File) in the extracted folder. Extract that file too using 7 Zip
4 Install Mi Flash Tool.
5 Open Mi Flash Tool using icon created after installation.
6 Switch off your phone.
7 Press Vol – & Power button simultaneously to start the device in Fastboot Mode.
8 Now connect the phone to your PC/Laptop using USB Cable.
9 Press the Refresh button & you will have the following screen of Mi Flash Tool.
Once the device is connected & detected, enter the correct path of the final extracted folder using the Browse button.
Select Flash All for best results as it will clean install the ROM. Now, press Flash button & wait for the procedure to complete. Once successfully flashed device will reboot & you can safely disconnect it from your PC/Laptop.
The device will be showing Mi Logo screen, it will take some time to install entire MIUI on your device so kindly wait patiently & let the process end. Once the process ends it will show the MIUI 9 logo for you to do the device set up – just like the new device you get out of the box. Complete the setup & your device is ready to be used.
IMPORTANT NOTE :
I did it successfully on my Xiaomi Redmi Note 4.
Carry out each instruction very carefully & exactly as directed.
I’m not at all responsible for any damage whatsoever to your device.
Fastboot your device at YOUR OWN RISK.
Take the backup of your data as all will be removed during the process.
No comments:
Post a Comment